- They barely get the introductions done, and Richard is off on a tangent about the great hobo migration in Texas. All this just proves Larry Bushey of the Going Linux podcast is right: LHS rambles. More on this in a moment.
- Richard and Russ discuss a disparaging comment Mitt Romney made six years ago about ham radio operators. He's since reversed his position, at least publicly.
- Larry Bushey says LHS rambles in episode 160 of the Going Linux podcast. You know, Larry, you're right. 🙂
- Terminal emulation programs for Linux.
- If you're interested in running packet radio with your Linux computer, you'll likely need a terminal emulation program to communicate with your terminal node controller(TNC). There are several Linux tools you can use:
- setserial is a command-line program designed to set and/or report the configuration information associated with a serial port.
- microcom is a very basic terminal emulation program. Tip: pressing Control-\ will access the menu.
- minicom is a menu-driven communications program. It emulates ANSI and VT102 terminals, has a dialing directory and auto zmodem download.
- At the command line, type "minicom -s" to begin configuration. The first time you run "minicom -s", you'll probably want to run it as root so you have write access to the configuration file.
- The first serial port in Linux is called ttyS0.
- Most things will work at 9600 baud, 8 data bits, no parity bit, and 1 stop bit.
- Text based modem control program.
- Runs in a terminal screen
- It's useful for other serial port tasks, too.
- Ctrl-A followed by W turns on line wrap, so you won't have long lines truncated.
- Install on a Debian-based system by using "apt-get install minicom" or use Synaptic.
- Press Ctrl-A then X to exit.
- GTK Term is a terminal emulator written with GTK+.
- Gets added to the launch menu during installation, but with the name "Serial Port Terminal", not "GTK Term".
- Has a nice looking interface.
- Easy access to the serial port settings.
- CuteCom is another graphical terminal emulator, with split input and output screens.
- Sean, AC0VD, writes about https://www.badgerbadgerbadger.com. Thanks, Sean. That's pretty much where the whole badger thing on LHS began. Sean also likes the howto article Installing Linux on a Dead Badger.
- Ilan Rabinovich, of the Southern California Linux Expo, SCALE, sent a voice mail asking that we play promotions for the event. Unfortunately, we're too late with releasing the LHS episodes to promote SCALE in time. We'll try to do better next year.
- Richard has posted an article Making Yourself Clear on the Radio, and it received a couple of comments:
- Tim liked the article and agrees that talking slower helps.
- Lief, KC8RWR, notes that codes and ciphers are only prohibited when intended to hide the meaning of a transmission.
- We received a donation from Walter J. Thank you, Walter!
- John, KF6EFG, asks what was the open source podcast mentioned in a recent episode. We don't remember, John, but it may have been any of these:
- The Dalton Hamfest in Dalton, Georgia, will have an LHS ambassador on duty! Look for the LHS booth on February 25th, 2012.
- If you'd like your podcast included in the Black Sparrow Media empire, send us an email!
- Contact Richard at firstname.lastname@example.org, Russ at email@example.com, or both at the same time at firstname.lastname@example.org.
- Listen to the live stream every other Tuesday at 8:00pm Central time. Check the LHS web site for dates.
- Leave us a voice mail at 1-909-LHS-SHOW (1-909-547-7469), or record an introduction to the podcast.
- Sign up for the LHS mailing list.
- Sign up for the MAGNetcon mailing list.
- LHS merchandise is available at the Merch link on Web site. Check out the Badgerwear or buy one of the other LHS-branded items at PrintFection.com/lhs or Cafe Press. Thanks!
- Thanks to Dave from Gamma Leonis for the theme music.
- To be added.